Filter Press Spec: This particular metallurgy company purchased 3 PP Membrane Hengda Filter Press machines. The type number is XMYZFL400/1500-UKPG. Each filter press’s filter area is 400 square meters (4305 square feet). PP Membrane Filter Plate is 1500 x 1500 x 85mm (4.92′ x 4.92′ x 0.27′), Filter Frame size is 1500 x 1500 x 75mm (4.92′ x 4.92′ x 0.25′), with automatic pull board and wetted flap installation. External non-washable model.
Filter Media: After manganese is crushed, processed by acid leaching, then naturalized by alkaline chemicals, the pulp is then filtered through PP Membrane Filter Press, slag is discarded, the filtrate is then electrolyzed.
Slag Processing Capacity: The selected feed pump flow is 100m3/hour (3,531.5ft³/hour), lift is 80m (262.47 ft), pump flow volume is 12m3 (423.78ft³), lift is 120m (393.7 ft). The total filtration cycle takes approximately 80 minutes (including raw material feed time 45 minutes, filtration 15 minutes, automatic pull board and flap cycle 12 minutes, other operations 8 minutes). Each cycle produces approximately 9 tons in slag, filter cake moisture approximately 25%. Each day (24-hour operation) each machine could process 162 tons of slag.